Underwater
Hull Robotic System

How It Works
With a electrically driven magnetic wheel, Robbot attaches and crawls on hulls surface while brushing off foulings. It is remotly powered, monitored and controlled via tether cable by one operator.
Assistant systems ensure its easy launch and retrieval in most conditions. Comprehensive reports are generated with the entire position-tagged vivid video records, in a short time later after each cleaning task.

WHO NEEDS IT WHERE ?
When worked with divers beside berths or in anchorage, it covers large flat and curved surfaces in quick, less expensive and safe manners. Possibly a vessel can carry the robot and clean herself anytime. Due to CHIRO’s design for compact mobilization and easy operation, it gives the best efficiency in proactive hull care while fouling is still micro or slime. Should fouling grow harder, stronger brushes and larger filtration system might be deployed, which causes the job more difficult, costly and time consuming.

WHY CUSTOMERS LIKES IT ?
Result of Robot cleaning is quite consistent with transparent reports, which becomes essential in order to comply regulations from authorities and environmental vows. Besides, it saves fuels as well as potential accidents.

Boat Operating Mode
- The system can be employeed on a workboat for the cleaning task at an anchorage.
- Process is same to berth operation
- The boat operation only system can be optimized. We are open for customizing
Control & Report Mode

- Control is similar to car driving, not difficult like swimming drone.
- Robot is invisible but its location is tracked and visualized in the map.
- Realtime operational data is summerized in a screen.
- Brushing force control is at your will. Soft or hard. So is driving.
Main Control Screen : Front & Rear view, Control values and robot tracking on ship’s surface

- Mutual connection between location and video record
- Digitally authentification
- Full length of video, if requested.